Fingers Strap Replacement (Trigger Assembly) - Motorola RS507 Quick Reference Manual

20
Note: An optional Triggerless Finger Clamp should be installed when the
Imager is intended to be used in Motion and Proximity Initiated Barcode Read
mode.

Fingers Strap Replacement (Trigger Assembly)

Removal
Remove the Fingers Strap from the
1.
Strap Buckle.
Pull the Fingers Strap out of the
2.
Trigger Assembly.
Installation
Align a new Finger Strap with the
1.
Slots in the Trigger Assembly.
Gently press the Strap Pins to
2.
engage with the Slots of the Trigger
Assembly. The Strap Pins snap into
the Slots.
Slip the Fingers Strap through the
3.
Strap Buckle.
RS507 Hands-Free Imager
Fingers Strap
Strap Pins
Trigger Assembly
Slots
Strap Buckle