Remove Bluetooth Connection; Restore Lost Bluetooth Connection - Motorola RS507 Quick Reference Manual

12
Launch the Bluetooth Device (BD) Address application on the mobile
3.
computer. Most BD Address applications display a pairing barcode image on
the screen of the mobile computer.
Scan a pairing barcode form the mobile computer screen or any provided label.
4.
When scanning, the Imager emits one string of high/low/high/low beeps.
The Scan LED starts flashing green indicating that the Imager is attempting to
5.
establish connection with a mobile computer.
When connection is established, the Scan LED turns Off and the Imager emits
6.
one string of low/high beeps. The Imager is connected and ready for scanning.
NOTE When replacing the Imager battery, the Imager memory retains the pairing
information of last paired mobile computer (e.g WT4090).

Remove Bluetooth Connection

Scan an unpairing barcode label with the Bluetooth address for disconnecting
1.
the Imager from the mobile computer (e.g WT4090).
The Imager emits one string of high/low beeps indicating that Bluetooth
2.
communication with the mobile computer is disconnected.

Restore Lost Bluetooth Connection

The Imager maintains Bluetooth communication with a mobile computer within a
range of 10 meters (30 feet). When the Imager fails to establish connection or
connection is lost during operation, the Imager emits one string of low/high beeps.
To reestablish Bluetooth connection with a mobile computer (e.g WT4090):
Ensure that the Imager is within a range of 10 meters (30 feet) from the mobile
1.
computer.
Ensure that the mobile computer is On and "awake" (not in Suspend mode).
2.
The Imager automatically attempts reconnecting to the mobile computer for 30
3.
seconds (Scan LED flashes green). If automatic re-connection fails, verify that
the Imager is within Bluetooth range and briefly press the Restore Key on the
Imager to reconnect.
The Scan LED starts flashing green indicating that the Imager is attempting to
4.
establish connection with a mobile computer (e.g WT4090).
The Scan LED turns Off and the Imager emits one string of low/high beeps
5.
indicating that the Imager is connected and ready for scanning.
RS507 Hands-Free Imager