Status Indications - Motorola RS507 Quick Reference Manual

Quick Reference Guide

Status Indications

The Imager has two Scan LEDs that provide identical indications. The Imager is
also equipped with a beeper that generates sound indications in variable tones.
NOTE In corded adapter configuration, beep indications are emitted only from the
WT4090.
No. LED
1. None
2. Short green
flashes
3. None
4. None
5. None
6. None
7. None
8. One green
flash
9. None
Bluetooth Connection
Establish Bluetooth Connection
To establish Bluetooth connection with a mobile computer:
Ensure that the Imager is within a range of 10 meters (30 feet) from the mobile
1.
computer.
Install the battery on the Imager.
2.
Beep Indication
High/low
None
Low/high
High/low
high/low/high/low
Long low/
long high/
Long low/
long high/
Long low/
long high/
High
4 long beeps
Description
Bluetooth communication is
disconnected
Attempting to connect over
Bluetooth
Imager is connected over
Bluetooth
Bluetooth communication is
disconnected - Imager is out of
range
Properly decoded scan of
Bluetooth pairing Barcode
Bluetooth connection attempt
failed
Bluetooth connection attempt is
rejected
Proper scanning indication
No Bluetooth communication after
scanning time-out
11