How To Do 360º Stunt Rolls; Dart ™ 1.0 Warning; Replacing The Propeller Blade - Propel RC DART 1.0 Instruction Booklet

HOW TO DO 360º STUNT ROLLS
1.In order to make your DART ™ 1.0 do 360º rolls you must fully charge your battery.
Note:The DART ™ 1.0 will not do 360º stunt rolls in T-Mode,Mode 1 or under low battery
indication (The LED lights on the drone will be flashing).
2.Once you are ready to attempt a 360º roll,simply depress and let go of the "STUNT" button on the top
right hand side of your controller (see Remote Diagram on page 3); you will hear a sound.This means
you are now in"STUNT MODE."
3.Now quickly move your right control stick in any of 4 directions; up,down,left or right.Your DART ™
1.0 copter will instantly roll in the associated direction.See diagram below.
360˚Stunt Roll
L
9
DART ™ 1.0 WARNING:
The DART ™ 1.0 is designed for INDOOR and OUTDOOR use.
cause damage to the user,spectators and animals.Stand away from the DART ™ 1.0 to reduce the risk of getting into the
flight path.Warn spectators that you will be flying your DART ™ 1.0 so that they are aware of its position.Before flight,
inspect the rotor blades to make certain that the blades are securely fastened to the DART ™ 1.0.
WARNING!
• Choking/Cutting Hazard.Small Parts/Sharp Rotor Blades.
• Keep hands,hair and loose clothing away from the propeller when the power switch is turned to the ON position.
• Turn off the transmitter and DART ™ 1.0 power switches when not in use.
• The included charger is built specifically for the DART ™ 1.0 Li-Poly battery.Do not use it to charge any other battery.
• New alkaline batteries are recommended for maximum performance.
• Parental supervision recommended when flying DART ™ 1.0.
BATTERY WARNINGS
R
ECHARGEABLE BATTERY:
This DART ™ 1.0 uses a Li-Poly rechargeable battery. If battery no longer stays charged,dispose of battery properly
according to local disposal requirements.
CONTROLLER BATTERIES:
Remote control requires 2"AAA"batteries (included).Please read the important battery safety warning below.
• Do not mix alkaline,standard (carbon-zinc) and rechargeable batteries (nickel metal hydride).
• Do not mix old and new batteries.
• Non-rechargeable batteries are not to be recharged.
• Rechargeable batteries are to be removed from the item before being charged (if removable).
• Rechargeable batteries are only to be charged under adult supervision.
• Exhausted batteries should be removed immediately and must be recycled or disposed of properly
according to state or local government ordinances and regulations.
• The supply terminals are not to be short-circuited.
M
• Only batteries of the same or equivalent type as recommended are to be used.
• Batteries are to be inserted with the correct polarity (see inside booklet for diagram).
• Do not dispose of batteries in a fire - batteries may leak or explode.
CARE AND MAINTENANCE
• Always remove the batteries from the wireless infrared remote control when it is not being used for an extended period
of time.
• To clean,gently wipe the remote control and DART ™ 1.0 with a clean damp cloth.
• Keep the toy away from direct heat or sunlight.
• Do not submerge the toy into water.This can damage the unit beyond repair.
• Parental guidance recommended when installing or replacing the batteries.

REPLACING THE PROPELLER BLADE

Your
time to time for optimal flight function.Crash landing from high-speed aerial flights may cause damage
to your
1. The
2.Pick up a blade from the included spare parts and match
3.Replace the broken blade with the correct spare blade.
propeller system is a precision instrument that may need repair or replacement from
DART ™ 1.0
propellers.
DART ™ 1.0
has four blades:one A and one B blades on front,and one B and one A blades on back
DART ™ 1.0
(see diagram E).
the marking to diagram E.
The DART ™ 1.0 blades revolve at high speeds and can
Front
E
Back
10