Display The Id Code; Additional Information Cd Player And Care - Pioneer DEH-P6400 Operation Manual

Section
Other Functions
08

Display the ID Code

Each XM tuner is identified with a unique radio
ID. You will need the radio ID when activating
XM service or when reporting a problem. How to
display the ID code depends on the channel
select mode.
Channel number select mode
If you select
CH 000
• Select the
CH 000
Channel category select mode
is provided as a channel category for
RADIO ID
displaying the ID code.
• Select the Channel Category
with the 5/∞ buttons.
• If you select another channel, display of the ID
code is canceled.
• Display of the ID code repeats displaying
and the ID code one after the other..
RADIO ID
38
En
, the ID code is displayed.
with the 2/3
RADIO ID
Additional Information
CD player and care
• Use only CDs that have either of the two
Compact Disc Digital Audio marks as show
below.
• Use only normal, round CDs. If you insert
irregular, non-round, shaped CDs they may
jam in the CD player or not play properly.
• Check all CDs for cracks, scratches or warped
discs before playing. CDs that have cracks,
scratches or are warped may not play prop-
erly. Do not use such discs.
• Avoid touching the recorded (non-printed
side) surface when handling the disc.
• Store discs in their cases when not in use.
• Keep discs out of direct sunlight and do not
expose the discs to high temperatures.
• Do not attach labels, write on or apply chemi-
cals to the surface of the discs.
• To clean dirt from a CD, wipe the disc with a
soft cloth outward from the center of the disc.
• If the heater is used in cold weather, moisture
may form on components inside the CD
player. Condensation may cause the CD
player to not operate properly. If you think that
condensation is a problem turn off the CD
player for an hour or so to allow the CD player
to dry out and wipe any damp discs with a soft
cloth to remove the moisture.
• Road shocks may interrupt CD playback.