Initial Settings
Switching the auxiliary setting
It is possible to use auxiliary equipment with
this unit. Activate the auxiliary setting when
using auxiliary equipment connected to this
unit.
1 Press
to select
FUNCTION
Press
repeatedly until
FUNCTION
in the display.
on or off with 5/∞.
2 Select
AUX
Pressing 5/∞ will switch
off and that status will be displayed (e.g.,
).
AUX :ON
Switching the dimmer setting
To prevent the display from being too bright at
night, the display is automatically dimmed
when the car's headlights are turned on. You
can switch dimmer on or off.
1 Press
to select
FUNCTION
Press
repeatedly until
FUNCTION
appears in the display.
on or off with 5/∞.
2 Select
DIM
Pressing 5/∞ will switch
and off and that status will be displayed (e.g.,
).
Dimmer :ON
.
AUX
appears
AUX
between on and
AUX
.
DIM
Dimmer
between on
Dimmer
Selecting the brightness
You can select the display brightness. Initially
this mode is set to 12.
1 Press
to select
FUNCTION
Press
repeatedly until
FUNCTION
appears in the display.
2 Select the desired brightness with 2/3.
• The display shows
–
0
.
BRIGHT
Brightness
.
15
En
Section
07
33