Using The Parts List - Xerox ColorQube 8700 Service Manual

V1/v2/v3 connectkey
Hide thumbs Also See for ColorQube 8700:
Table of Contents

Advertisement

Using the Parts List

ID No.: The callout number from the exploded part diagram.
Name/ Description: The name of the part to be ordered and the number of parts supplied per
order.
Part Number: The material part number used to order that specific part.
Parts identified throughout this manual are referenced PL#.#.#; For example, PL3.1.10 means the
part is item 10 of Parts List 3.1.
A black triangle preceding a number followed by a parenthetical statement in an illustrated parts
list means the item is a parent assembly, made up of the individual parts called out in
parentheses.
The notation
"with
components X through Y. For example, "1 (with 2~4)" means part 1 consists of part 2, part 3, and
part 4.
An asterisk (*) following a part name indicates the page contains a note about this part.
The notation (NS) next to a part indicates that particular part is not spared, but contained in a kit
or major assembly.
The notation
"J1<>J2 and
attached to one end of the wire harness and connector J2 is attached to the other end that is
plugged into P2.
Note:
Only parts showing part numbers are available for ordering by support. Parts not showing
part numbers are available on the parent assembly.
Abbreviation
ColorQube 8700/8900 v1/v2/v3 Service Manual
X~Y" following a part name indicates an assembly that is made up of
P2" is attached to a wire harness. It indicates that connector Jack 1 is
C
E
KL
S
Meaning
C-ring
E-ring
K-clip
Screw
Parts List
5-5

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Colorqube 8900

Table of Contents