Infrastructure Mode - Linksys WPC11 User Manual

Infrastructure Mode

1. If you have chosen Infrastructure mode, the following screen (Figure 2-9)
will appear. If you have chosen Ad-Hoc mode, skip to the next section,
titled "Ad-Hoc Mode".
Figure 2-9
You will be prompted to enter an SSID value in the box provided. The
SSID may be up to 32 characters in length. This may include any character
on the keyboard, keeping in mind that the SSID is case sensitive. All SSID
values on your wireless network must match. If you are unsure, use the
default value of "linksys." Then, click the Next button.
2. The Review
Settings screen
(Figure 2-10) will
appear next. Verify
that all the settings
are correct and
click the Next but-
ton to continue.
9
Instant Wireless Series
TM
Figure 2-10
Network PC Card
3. The screen shown
in Figure 2-11 will
appear, indicating
that all of the
appropriate files
are being copied
onto your drive.
Click the Cancel
button if you need
to stop the installa-
tion for any reason.
4. Once Windows has finished copying the necessary files, the screen shown
in Figure 2-12 will appear. In order for the drivers to be installed properly,
you must restart your computer. If you choose to do it now, select Yes, I
want to restart my computer now.
choose No, I will restart my computer later. Once you have made your
choice, click the Finish button to continue.
Figure 2-12
Note: Restart the computer and go to Chapter 3:
Installing the Network PC Card for further instructions.
Figure 2-11
If you do not want to do it now,
10