Linksys WPC11 User Manual page 13

3. Installation will begin and you will reach the screen in Figure 6-3. You will
want to select the box that reads Wired to the network since you are adding
network hardware. Click the Next button to continue.
4. The screen shown in Figure 6-4 will not show any Network Adapters
installed on your system; this signifies that no network adapter has been pre-
viously installed. Click the Select from list button to continue.
19
Instant Wireless Series
Figure 6-3
Figure 6-4
Network PC Card
5. A list of adapters
will appear as in
Figure 6-5. You will
not want to select
one of these, howev-
er, as your installa-
tion disk (the Setup
Utility CD) has all
of the appropriate
drivers. Click the
Have Disk button to
continue.
6. When the Insert Disk
screen appears (shown
in Figure 6-6), type
"D:\WINNT" in the
field provided and click
the OK button to con-
tinue.
7. The Select OEM Option screen (shown in Figure 6-7) will display all
available adapters. Make sure that Instant Wireless - Network PC Card
V3.0 is highlighted and click the OK button to continue.
Figure 6-7
Figure 6-5
Figure 6-6
20