Linksys WPC11 User Manual page 6

2. The first tab across the top of the screen, labeled Install, should now be high-
lighted. Click the Install button. A screen similar to that shown in Figure
2-2 should appear, indicating that Windows is preparing the installation.
Figure 2-2
If, for whatever reason, you need to abort or terminate the installation, press
the Cancel button at any time during the installation. Otherwise the instal-
lation will continue automatically.
Note: If you stop the installation before it has finished, you will have to
run the installation completely again before installing your hardware.
3. The screen in Figure 2-3 will appear next, indicating that Windows is ready
to continue the installation. Click the Next button.
Figure 2-3
5
Instant Wireless Series
TM Network PC Card
4. Figure 2-4 shows the Warranty Policy screen. Read the entire policy by
pressing the Page Down button on your keyboard or by using the on-screen
scroll bar. Click on the Yes button if you agree, or No if you disagree.
Clicking No will terminate the installation. If you click Yes, the installation
will continue.
Figure 2-4
5. The screen in Figure 2-5 will appear next, requesting the folder into which
the Configuration Utility will be installed. To install the Configuration
Utility in the
default directo-
ry (recom-
mended), click
the Next but-
ton. If you
prefer to install
the Utility in
another direc-
tory, click the
Browse button,
and locate the
p r e f e r r e d
d i r e c t o r y .
Then, click the
Next button.
Figure 2-5
6