Nuova Simonelli Talento User Handbook Manual page 43

EN
Failure to observe the above, could make the
appliance unsafe.

For installation, the qualified electrician
must fit an omnipolar switch in accord-
ance with the safety regulations in force
and with 3 (0,12) or more mm (in) between
contacts.

To avoid dangerous overheating, make
sure the supply cord is fully uncoiled.

Do not obstruct the extraction and/or dis-
sipator grids, especially of the cup warmer.

The user must not replace the appliance
supply cord. If the cord is damaged,
switch off the appliance and have a quali-
fied technician change the cord.

If no longer using the appliance, we
recommend making it inoperative; after
removing the plug from the mains elec-
tricity, cut the power supply cable.
RISK OF POLLUTION

Do not dispose of the machine in the
environment: to dispose of the machine,
use an authorised centre, or contact the
manufacturer for relative information.
Fig. 8
CAUTION

To ensure that the machine is properly
ventilated, place it with the ventilation
side at a distance of 15 cm (5,9 in) from
walls or other objects.

Once a machine wash cycle has been
started, do not interrupt it, as detergent
residues may then be left inside the deliv-
ery group.
RISK OF INTOXICATION

Use the steam nozzle with care and never
place hands below the jet of steam. Do
not touch the nozzle immediately after
use.
RISK OF BURNS OR SCALDING

We remind you that before carrying out
any installation, maintenance, unloading
or adjustment operations, the qualified
operator must put on work gloves and
protective footwear.
RISK OF CUTTING

When adding coffee beans, the machine
operator must not place his/her hands
inside the container.
Fig. 9
CAUTION
Fig. 10
CAUTION
CAUTION
41