Mounting; Orientation; Rigging; Procedure - Chauvet Amhaze Stadium User Manual

S
ETUP

Mounting

Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes.
For our CHAUVET Professional line of mounting clamps, go to http://trusst.com/products/.

Orientation

Always mount this product in a safe position, making sure there is adequate room for ventilation,
configuration, and maintenance.

Rigging

Chauvet recommends using the following general guidelines when mounting this product.
• Before deciding on a location for the product, make sure there is easy access to the product for
maintenance and programming purposes.
• Make sure that the structure onto which you are mounting the product can support the product's
weight. See the Technical Specifications
• When mounting the product overhead, always use a safety cable. Mount the product securely to a
rigging point, whether an elevated platform or a truss.
• When rigging the product onto a truss, use a mounting clamp of appropriate weight capacity.

Procedure

The AmHaze Stadium includes 4 rubber feet for floor mounting and comes with a threaded mounting hole,
size M12, at the top of the hazer. This mounting hole is appropriate for use with a mounting clamp. You
must supply the mounting clamps. Make sure the clamps are capable of supporting the weight of this
product. Use at least one mounting point per product. For the CHAUVET Professional line of mounting
clamps, go to http://www.trusst.com/products.
Mounting Diagram
Mounting Clamp
Threaded
Mounting Hole
Size M12
AmHaze Stadium User Manual Rev. 1
for weight information.
Rubber Feet (x4) for
floor mounting
Safety Cable
Haze Knob
Fan Knob
Page 8 of 15