Preparing For Operation - Chauvet Amhaze Stadium User Manual

Preparing for Operation

To prepare the AmHaze Stadium for operation:
1. Open the flight case.
2. Pull out the fluid tank and remove the cap.
3. Verify that the two plastic hoses attached to the inside of the cap are in place and in good
condition.
4. Pour Chauvet (PHF) haze fluid inside the tank, and re-cap.
5. Reinsert the tank.
6. Make sure that the plastic hose that goes from the cap to the hazer is not bent.
7. Plug in power and wait approximately 30 seconds for warm-up to complete.
Only use Chauvet approved (PHF) haze fluid. Otherwise, you might not have
satisfactory results. In addition, unapproved fluid can damage the AmHaze
Stadium or cause harm to humans or animals. This may void your warranty.
When storing the product, ALWAYS be sure to store the fluid tank with the
cap up, as seen on the storage diagram below before installing the front
cover to avoid tube damage that may cause leakage.
Page 9 of 15 AmHaze Stadium User Manual Rev. 1
S
ETUP