Panasonic KX-FP81BX Service Manual page 88

KX-FP81BX / KX-FP81CX / KX-FP82CX
Code
595 Receive error limit value set
596 Transmit level set
598 Receiving sensitivity
599 ECM frame size
700 EXT.TAM OGM Rec. time
701 No voice detect time
717 Transmit speed selection
718 Receive speed selection
719 Ringer off in TEL/FAX mode
721 Pause tone detect
722 Redial tone detect
745 Power ON film feed
763 CNG detect time for friendly
reception
771 T1 timer
774 T4 timer
815 Sensor & Vox check
852 Print test pattern
853 Top margin
854 Left margin
880 History list
881 Journal 2 list
882 Journal 3 list
890 TEL/FAX 1st ring back tone
Function Set Value
X Number of
times
X dBm
43= -43 dBm
1:256 2:64
X second
X100 msec
1:9600BPS
2:7200BPS
3:4800BPS
4:2400BPS
1:9600BPS
2:7200BPS
3:4800BPS
4:2400BPS
1:ON 2:OFF
1:ON 2:OFF
1:ON 2:OFF
1:ON 2:OFF
1:10 sec
2:20 sec
3:30 sec
1:35 sec
2:60 sec
X 100 msec
1:ON 2:OFF
Effective Default
Range
001~999 100 Sets the number of acceptable error lines when
the FAX reconstructs the received data. Refer to
2.3.5.1.3. RECEIVE PROBLEM(P.49).
- 15~00 10 Selects the FAX transmission level. Refer to
2.3.5.1.2. SOMETIME THERE IS A TRANSMIT
PROBLEM (P.48)and 2.3.5.1.3. RECEIVE
PROBLEM (P.49).
20~48 41 Used when there is an error problem. Refer to
2.3.5.1.5. THE UNIT CAN COPY, BUT CANNOT
EITHER TRANSMIT/RECEIVE LONG DISTANCE
OR INTERNATIONL COMMUNICATIONS(P.50).
1, 2 1
01~99 10 Sets the start time of silent detection.
01~99 50 Sets the silent call confirmation detection time.
1~4 1 Adjusts the speed to start training during FAX
transmission. Refer to 2.3.5.1.2. SOMETIME
THERE IS A TRANSMIT PROBLEM (P.48)and
2.3.5.1.6. THE UNIT CAN COPY, BUT THE
TRANSMISSION AND RECEPTION IMAGE ARE
INCORRECT(P.52).
1~4 1 Adjusts the speed to start training during FAX
reception. Refer to 2.3.5.1.3. RECEIVE
PROBLEM(P.49) and 2.3.5.1.6. THE UNIT CAN
COPY, BUT THE TRANSMISSION AND
RECEPTION IMAGE ARE INCORRECT (P.52).
1, 2 1 Selects the ringer switch off when a call is
received in the TEL/FAX mode.
1, 2 1 Selects the tone detection for pause in dialing.
1, 2 1 Sets the tone detection mode after redialing.
1, 2 1 When the power is turned on, the film is wound to
take up any slack.
1~3 3 Selects the CNG detection tone of friendly
reception.
1, 2 1 Sets a higher value when the response from the
other party needs more time during FAX
transmission.
00~99 0 Use this function when delay occurs in the line
and communication (ex. Mobile comm) does not
work well.
See 2.5. TEST FUNCTIONS(P.99).
See 2.5. TEST FUNCTIONS(P.99).
1~9 5
1~8 5
See 2.4.6. HISTORY(P.90).
See 2.4.7.3. PRINTOUT EXAMPLE(P.97).
See 2.4.7.3. PRINTOUT EXAMPLE(P.97).
1, 2 1 Selects whether the TEL/FAX 1st ring back tone
is ON or OFF in the TEL/FAX mode.
88
Remarks
----------
----------
----------