Panasonic KX-FP81BX Service Manual page 23

1.15.2.1. MAINTENANCE LIST
NO. OPERATION
1 Document Path
2 Rollers
3 Platen Roller
4 Thermal Head
5 Sensors
6 Glass
7 Abnormal, wear and tear
or loose parts
1.15.2.2. MAINTENANCE CYCLE
No. Item
1 Separation Roller (Ref. No. 117)
2 Separation Rubber (Ref. No. 5)
3 Feed Rollers (Ref. No. 4)
4 Thermal Head (Ref. No. 33)
5 Platen Roller (Ref. No. 93)
6 Pickup Roller (Ref. No. 72)
* These values are standard and may vary depending on usage conditions.
CHECK
Remove any foreign matter such as paper.
If the roller is dirty, clean it with a damp cloth then dry
thoroughly.
If the platen is dirty, clean it with a damp cloth then dry
thoroughly. Remove the paper and film cartridge before
cleaning.
If the thermal head is dirty, clean the printing surface with a
cloth moistened with denatured alcohol (alcohol without
water), then dry thoroughly.
Document sensor (PI302), Read position sensor (PI301),
Hook switch (SW101), Paper top sensor (PI501), Film end
(SW501), Cover open sensor (PI303), Document top switch
(SW353), Document set switch (SW352) and Confirm the
operation of the sensors.
If the glass is dirty, clean them with a dry soft cloth.
Replace the part. Check if the screws are tight on all parts.
Cleaning Cycle
3 months
3 months
3 months
3 months
3 months
3 months
23
Refer to 1.15.3.
MAINTENANCE(P.24).
Refer to 1.15.3.
MAINTENANCE(P.24).
See 1.15.2. MAINTENANCE CHECK
ITEMS/COMPONENT
LOCATIONS(P.22) and 4.4. HOW TO
REMOVE THE ANALOG, DIGITAL
AND POWER BOARDS AND AC
INLET (P.110).
Refer to 1.15.3.
MAINTENANCE(P.24).
Replacement
Cycle
7 years* Refer to 4.6. HOW TO REMOVE
(100,000 documents) THE SEPARATION
ROLLER(P.113).
7 years (100,000 documents) Refer to 1.15.2. MAINTENANCE
CHECK ITEMS/COMPONENT
LOCATIONS(P.22).
7 years (100,000 documents) Refer to 4 DISASSEMBLY
INSTRUCTIONS(P.107).
7 years (100,000 documents) Refer to 4.8. HOW TO REMOVE
THE TERMAL HEAD(P.115).
7 years (100,000 documents) Refer to 4.9. HOW TO REMOVE
THE PLATEN ROLLER, BACK
COVER(P.116).
7 years (100,000 documents) Refer to 4.10. HOW TO
REMOVE THE PICKUP
ROLLER(P.117).
KX-FP81BX / KX-FP81CX / KX-FP82CX
REMARKS
—
—
—
Procedure