6.4.5.
STEPPING MOTOR DRIVE CIRCUIT
1. Function
The stepping motor works for both transmission and reception.
2. Motor
During motor driving, pin 131 of ASIC IC501 becomes a high level, and Q503, Q502 turns ON. As a result, +24V is supplied
to the motor coil.
Stepping pulses are output from ASIC IC501 pins, 125, 128~130, causing driver IC508 pins, 15~12 to drive the Motor Coil. The
motor coil is energized sequentially in 2 phase increments, which causes a 1-step rotation. A 1-step rotation feeds 0.13 mm of
recording paper or document paper.
The timing chart is below.
Function
Copy
Paper Feed
Stand-by
Stepping Motor Drive Mode
Mode
Standard or Fine
1-2
Super Fine
1-2
———
1-2
———
All phases are
currently off.
141
Phase Pattern
Speed
432 pps (t=1/432)
216 pps (t=1/216)
432 pps (t=1/432)
None
KX-FP81BX / KX-FP81CX / KX-FP82CX