Command Formats - Pioneer CLD-V2800 User Manual

3.5 Command Formats

Level III commands on the CLD-V2800 are expressed as "Command Mnemonics", so
they are easy to remember. "Command Mnemonics" are also used for Level III control
of the CLD-V2600, CLD-V2400, LD-V8000, LD-V4400, the LD-V2200, & LD-V4200
(a discontinued models), the LC-V330 Autochanger, as well as for the LD-V4100 (PAL
player), CLD-V2300 (NTSC/PAL) and the LD-V4300D (NTSC/PAL player). Some
commands are preceded by an "argument" expressed as an integer. These may
indicate a specific "address" location on the disc or set function parameters.
Command Mnemonic
alphabetic characters, representing the command mnemonic. There is no
distinction between uppercase letters and lowercase letters. Example: PL (Play);
Pl (Play); pl (Play).
Argument
—An argument is expressed in ASCII digits and it is placed before the
command. When a command requiring an argument has no argument, an error
(E06) is returned. An argument consists of either an address or an integer:
1) An Address
— The address can be a frame, time, or chapter number (LDs) or time,
block, track or index number (CDs) depending how the address flag is set. When an
address larger than the maximum allowable value is input, correct evaluation cannot
be made. Addresses may be expressed as numbers indicated below:
LD
Frame number
s
xxxxx
Chapter number
xx
Time numbers
H:MM:SS
Extended Time numbers
H:MM:SS.FF
Time
CD
s
N1 N2 N3 N4
MM:SS
Block numbers
N1 N2 N3 N4 N5 N6
MM:SS:BB
Track numbers
xx
Index numbers
xx-xx
Figure 3-F
CLD-V2800 Level III User's Manual
CLD-V2800 Level III • Chapter Three
— Each Level III command is expressed as two ASCII
CAV:
N1 N2 N3 N4 N5
minimum = 0 0 0 0 0 » maximum = 65535
CAV, CLV
N1 N2
minimum = 00 » maximum = 79
CLV:
N1 N2 N3 N4 N5
(N1=hour, N2 N3=minutes, N4 N5=seconds)
minimum = 00000 » maximum = 95959
CLV:
N1 N2 N3 N4 N5 N6 N7
(N1=hour, N2 N3=minutes, N4 N5=seconds, N6 N7 Frame No.)
minimum = 00000 » maximum = 9595929
CD
N1 N2 N3 N4
N1 N2=minutes, N3 N4=seconds, N5=blocks
N1 N2 N3 N4 N5 N6
Minutes 00-99, Seconds 00-59, Blocks 00-74
minimum = 00000 » maximum = 995974
CD
N1 N2
minimum = 01 » maximum = 99
CD
N1 N2 N3 N4
N1 N2 = Track , N3 N4= Index
Track = 01-99, Index = 00-99
minimum = 0100 » maximum = 9999
TP 120 v. 1.0 • 10/95
3-7