Pioneer CLD-V2800 User Manual page 49

Chapter Three • CLD-V2800 Level III
30) PRINT CHARACTER
Function: Characters are written into the User's Display Area.
Format: Integer
Character string
Explanation: The character string for one line in the User Display Area is written
with this command. It is effective when the user's display
specification of Register A is set to ON (4RA).
First, specify the line number using an integer. (Lines 0-9 are
selectable on the CLD-V2800.) After the command character PR is
entered, it is terminated with the <C/R> code. In the next
command line, specify the character string. A character string up
to 20 characters is allowed. Any commands subsequent to the
command character (PR <CR>), but prior to the character string's
<C/R>, are interpreted as characters to be printed to the User
Display Area.
Usable characters are shown in the Character Code Table below.
Figure 3-O
Execution: 4 R A 1 D S <C/R>
4 P R <C/R>
***************** <C/R>
5 P R <C/R>
* PROGRAM START * <C/R> R <C/R>
6 P R <C/R>
***************** <C/R>
3-30
LD/CD
P R <C/R>
<C/R>
The character "7F" is not available.
TP 120 v. 1.0 • 10/95
R <C/R>
R <C/R>
R <C/R>
R <C/R>
R <C/R>
R <C/R>
CLD-V2800 Level III User's Manual