Pioneer CLD-V2800 User Manual page 35

Chapter Three • CLD-V2800 Level III
<C/R>
Execution #6: * Pause Mode
(CDs) B K 0 3 2 8 1 2 P L <CR>
* Plays to 3 min. 28 sec., blk. 12 & enters Pause Mode. R <C/R>
NOTE: The On-Screen Display shows 3:28 but if a ?B is sent to
the player via computer, the player will return 032812.
6) PAUSE LD/CD
Function: Playback ceases and pausing occurs.
Format: P A
Explanation: If this command is sent to the player while it is in Random Access
Mode, pausing occurs at the current disc location, video and/or
audio playback ceases and a blue (or black) screen appears on the
monitor.
When using the MULTI-SPEED command with an address, the auto stop
function will be released if any other command, including a status request, is
sent before the specified address is reached.
Use the Stop Marker command to achieve an auto stop MULTI-SPEED function.
This will allow for status requests and maintain the end address marker.
Execution: * Play Mode
P A <C/R>
* Pause Mode
P L <C/R>
* Play Mode
7) STILL LD (CAV Only)
Function: Playback is stopped with picture displayed.
Format: S T
Execution #2: * Still Mode
F R 3 4 5 0 0 M F 3 4 5 0 0 SM
* Multi-Speed Mode, returns current frame number
Frame 34500 reached R <C/R>
* Still Mode
†
Note: Without the Stop Marker, the player would return the current frame number, then play past frame 34500.
3-16
IMPORTANT NOTE
R <C/R>
R <C/R>
TP 120 v. 1.0 • 10/95
†
?F <C/R>
CLD-V2800 Level III User's Manual