Gateway To Gateway - Edge-Core VR-100 User Manual

Gateway to Gateway

By setting this page, users can add the new tunnel between two VPN devices.
1. Tunnel No.: The tunnel number will be generated automatically from 1~100.
2. Tunnel Name: Enter the Tunnel Name, such as LA Office, Branch Site, Corporate Site,
etc. This is to allow you to identify multiple tunnels and does not have to match the
name used at the other end of the tunnel.
3. Interface: You can select the Interface from the pull-down menu. When dual WAN is
enable, there will be two options. (WAN1/WAN2).
4. Enable: Check the box to enable VPN.
Local Group Setup
Local Security Gateway Type: There are five types. They are IP Only, IP + Domain Name
(FQDN) Authentication, IP + E-mail Addr. (USER FQDN) Authentication, Dynamic IP +
Domain Name (FQDN) Authentication, Dynamic IP + E-mail Addr. (USER FQDN)
Authentication. The type of Local Security Gateway Type should match with the Remote
Security Gateway Type of VPN devices in the other end of tunnel.
1. IP Only: If you select IP Only, only the specific IP Address will be able to access the
tunnel. The WAN IP of 8-Port Dual-WAN VPN Router will come out in this filed
automatically, and you don't need to enter.
VR-100 8-Port Dual-WAN VPN Router
• 65 •