Pioneer S-EV1000V Operating Instructions Manual page 18

03 Controls and displays
9 SOUND MODE
Accesses settings in the Sound menu, such as
the tone controls (page 39).
10 Playback controls
– Starts/resumes playback
and
motion playback, frame reverse and
reverse scanning
and /
motion playback, frame advance and
forward scanning
– Jumps to the next chapter or track
– Jumps to the beginning of the
current chapter or track, then to previous
chapters/tracks
– Pauses playback; press again to restart
– Stops playback
11 Number buttons and SHIFT functions
The number buttons can be used for selecting
tracks directly, the functions above the buttons
are accessed by pressing SHIFT at the same
time as the button.
PROGRAM (SHIFT+1) – Use to program/
play a program list (page 31).
REPEAT (SHIFT+2) – Selects a repeat play
mode (page 30).
RANDOM (SHIFT+3) – Selects a random
play mode (page 31).
ST.MEMORY (SHIFT+4) – Use for saving
and listening to station presets (page 37).
MONO (SHIFT+5) – Press to listen to a
stereo FM broadcast in mono (page 22).
TIMER (SHIFT+6) – Use for setting and
checking the clock (page 19) and the
timers (page 40).
Note
1 Refer to Setting up the remote to control your TV on page 19 to use these controls with your TV.
18
En
– Use for reverse slow
– Use for forward slow
TEST TONE (SHIFT+7) (EV700/1000 only) –
Press to output the test tone for speaker
setup (page 23).
CH LEVEL (SHIFT+8) (EV700/1000 only) –
Use to adjust the speaker level (page 23).
CLEAR – Clears an entry
ENTER – Selects menu options, etc. (works
exactly the same as the ENTER button in 8
above)
12 SHIFT
Press to access the functions/commands
written in green on the remote
13 MUTE
Mutes the volume (page 39).
14 DISPLAY
Switches between information displays
(page 33).
15 TOP MENU
Displays the top menu of a DVD disc.
DVD MENU
Displays the DVD menu (for Video CD/
Super VCDs, DivX video and WMA/MP3/
JPEG discs, the Disc Navigator screen
appears).
16 RETURN
Press to return to a previous menu screen.
1
17 TV CONTROL
– Switches the TV on or into standby
INPUT – Switches the TV input
CHANNEL +/– – Selects channels
VOLUME +/– – Adjusts the TV volume