Before you start
Attaching the non-skid pads
EV700/1000 model only
Use the self-adhesive non-skid pads to provide
a stable base for the speakers. Attach four to
each speaker or stand
Center speaker
Speaker stands
Removing the front speaker grilles
If necessary, remove the front speaker grilles
as described below.
1
Gently ease the grille loose by gripping
the bottom and pulling towards you.
2
Pull the top free in the same way.
When reattaching, start from the top then push
the bottom in until secure.
• It is not recommended (due to dirt and
dust) to leave the speaker grilles removed.
• Since the speaker grilles may come loose,
make sure to place the speakers in a
location where they will not cause injury.
Note
1 If you choose to use the Front surround 3-spot setup (as explained in Home theater sound setup on page 23), it is necessary
to use the speaker stands provided (do not attach the pads to the base of the surround speakers). Using the speaker stands for
the Standard surround 5-spot setup is optional. See Attaching the surround speakers to the speaker stands on page 10 for more
on this.
1
as shown below.
Surround speaker
01
7
En