Switching Power On; Its Playback - Pioneer XDV-P9II Owner's Manual

Switching Power ON

When connected in the IP-BUS mode to a head unit other than a Pioneer Multi-Channel AV
Master Unit (e.g. AVM-P9000R), performing the following steps switches power ON.
Switch the display picture source to this unit.
1
For details, refer to the connected component's Owner's Manual.
Switch the head unit's source to this unit.
2
For details, refer to the head unit's Owner's Manual.
Precaution
• You cannot switch the head unit's source with remote control for DVD player.
• When you have switched power to this unit ON by pressing the POWER button, power
to this unit remains ON even if you switch power to the head unit OFF. Do not forget to
switch power to this unit OFF.
• When you eject a source disc (CD or MD) selected with the head unit, power to the
head unit switches OFF. Depending on the connection method, the picture on the rear
display may disappear.

ITS Playback

When connected to a Pioneer Multi-Channel AV Master Unit (e.g. AVM-P9000R), you can
operate the head unit to play just a desired track (ITS playback). This function differs slightly
from ITS playback with a Pioneer Multi-CD player. With this unit, ITS playback applies only
to the CD playing. For details, refer to the Multi-Channel AV Master Unit's Owner's Manual.
54