Setting For Digital Output (Digital Output) - Pioneer XDV-P9II Owner's Manual

Setting for Digital Output (DIGITAL OUTPUT)

Set digital output correctly to match the components you are using with this unit. There is no
need to change settings if this unit is not connected for digital output.
Precaution:
• Incorrect setting may result in noise and damage to speakers so be sure to read the manuals
of the connected components.
Move the joystick up/down to select
1
the "DIGITAL OUTPUT".
"DIGITAL OUTPUT" is indicated in blue. (For
details, see page 40.)
Click the joystick.
2
Digital output settings are indicated on the right of
the screen.
Move the joystick up/down to select the
3
desired digital output setting.
The currently set digital output setting is indicated in
yellow. The digital output setting selected with the
joystick is indicated in blue.
Digital output
DOLBY DIGITAL/LPCM
LPCM
Click the joystick.
4
The selected digital output setting is set.
Note:
• Linear PCM output of DTS audio is not possible. If you select the LPCM setting, DTS audio
is not output.
• When using this product with a Pioneer Multi-Channel AV Master Unit with digital input
(e.g. AVM-P9000R), select the "DOLBY DIGITAL/LPCM" setting.
• When using this product with the "DEX-P9R", select the "LPCM" setting.
• Pressing the RETURN button takes you back to the previous display.
Setting detail
Select when using a Dolby Digital compatible amp and decoder. The
Dolby Digital signal is output as it is. (Initial setting)
Select when using an amp and decoder that are not Dolby Digital
compatible. The Dolby Digital signal is converted to and output as a
linear PCM signal.
VD
48