Condition Memory; Resetting The Microprocessor - Pioneer XDV-P9II Owner's Manual

Condition Memory

This function memorizes audio language, subtitle language and picture mode settings made
during disc playback for up to 30 discs. Without any special operations, the final setting
details during playback of a disc are memorized. The next time a disc is played, the previous
settings are automatically applied.
Note:
• With some discs, audio language and subtitle language are automatically specified, in which
case condition memory does not function.
• When the number of discs exceeds 30, settings for the latest disc replace those for the least
recent disc.

Resetting the Microprocessor

Pressing the RESET button lets you reset the microprocessor to its initial settings without
changing SET UP MENU settings, Condition Memory and other memory settings.
Press the RESET button in the following cases.
• After changing the setting of the Mode switch on the rear of the unit.
• When this unit fails to operate correctly.
• When strange (incorrect) messages appear on the display.
Resetting
1 Turn the ignition switch OFF.
2 Press the RESET button.
Use a pen tip or other pointed instrument.
Note:
• After completing connections or when you want to erase all memorized settings or return the
unit to its initial (factory) settings, switch your engine ON or set the ignition switch to ACC
ON before pressing the RESET button.
6