Table of Contents
Advertisement
TOOL REFERENCE
TOOL REFERENCE
Very few special tools are needed to repair the Fuller Twin Countershaft Transmis-
sions. Ordinary socket wrenches, screwdrivers, etc., which are found in every mechanics
tool box can be used. Other standard shop items are necessary, such as a press, bearing
pullers, bearing drivers, mauls and soft bars.
Special tools which are needed consist mostly of snap ring pliers. Listed below are the
illustrations which show these tools.
PAGE
38, 45 & 74
37 &69
46 & 47
79
73
59
TOOL
Snap ring pliers, large
Snap ring pliers, medium (Needle-point type)
Bearing pullers, small
Torque Wrench, 1000 ft.-lb. capacity
Drive Gear Bearing Driver
Bearing and seal driver
HOW OBTAINED
Tool Supplier
Tool Supplier
Tool Supplier
Tool Supplier
Tool print of this can be
obtained from Fuller Ser-
vice Dept. No. T-18042-69
Ask for tool print #7551
Advertisement
Table of Contents
