WD 5.5xx M
For appliances with efficient filter clean-
ing: When vacuuming without a filter bag,
the filter cleaning indicator lights up red if
the cartridge filter needs to be cleaned.
Use efficient filter cleaning.
(see description / illustration
Wet vacuum cleaning
Attach the accessories to vacuum mois-
ture or wetness to the suction pipes or
directly to the handle.
Caution:
Do not use a filter bag!
Immediately switch the appliance off if foam
forms or liquids escape!
Note: If the container is full a float closes
the suction opening and the appliance
works at a higher speed. Switch off the ap-
pliance immediately and empty the contain-
er.
Efficient filter cleaning
WD 5.5xx M
If the filter cleaning indicator is red, initiate
the filter cleaning.
Illustration
Insert the suction hose with the handle
into the accessory compartment on the
appliance head. Press the efficient filter
cleaning key 3 x times with the appli-
ance switched on; wait 4 seconds be-
tween the individual presses.
Note: If the filter cleaning display is illu-
minated permanently or after the filter
cleaning switch has been activated sev-
eral times, check the reservoir for its fill
volume. Otherwise, the dirt might es-
cape when the container is opened.
Cleaning hard to reach locations or, where
vacuuming is not possible, like leaves from
a gravel bed.
Illustration
Connect the suction hose to the blower
)
connection, this will activate the blower
function.
Turn off the appliance.
Illustration
Hook the floor nozzle into the parking
position.
Turn off the appliance and disconnect
the mains plug.
Empty the container
Illustration
Remove the appliance head and empty
the reservoir filled with wet or dry dirt.
WD 5.5xx M
For appliances with drain screw:
Empty the dry dirt over the container.
Use the drain screw to empty liquids.
Storing the appliance
Illustration
Stow away the mains cable and acces-
sory at the machine. Store the appli-
ance in a dry room.
EN
Blowing function
Interrupting operation
Finish operation
9