Lenovo RackSwitch G8296 Installation Manual page 47

9. If not using the 2U air-duct option, secure the rear brackets to the front brackets
with M3.5 screws (Item 6). Torque the screws to approximately 0.5 Nm (4
inch-pounds).
10. Connect all external cables in accordance with the
page
11. Initialize the switch. See
12. If the switch is a replacement unit, set Vital Product Data (see
Product Data" on page
© Copyright Lenovo 2017
39.
Chapter 5, "Initializing the
83).
6
"Cabling Guidelines" on
G8296".
Chapter 3: Installing G8296 Hardware and Options
"Configuring Vital
47