3. From the front, slide the switch into the rack at the desired height.
4. Secure the switch to the front rack posts with M6 screws (Item 3) and either clip
nuts (Item 4) or cage nuts (Item 5). Torque the screws to approximately 5.7 Nm ± 0.1
Nm (50 inch-pounds).
5. Place clip nuts (Item 4) or cage nuts (Item 5) on the rear posts.
© Copyright Lenovo 2017
4
4
4
3
4
4
Chapter 3: Installing G8296 Hardware and Options
45