Power Leds - Lenovo RackSwitch G8296 Installation Manual

Power LEDs

© Copyright Lenovo 2017
On the front of the switch, the Power LED on the management panel indicates the
general status of the power supplies. The LED flashes when only one power cord is
connected, and is steady when both power cords are connected (see
LEDs" on page 24).
Additional LED indicators are located on the rear panel of the switch, on the
individual power supply modules. The following table describes the power supply
module LED behavior.
Table 8.
Power supply module status LED behavior
LED State
! - Service Amber
Off
DC Green
Off
AC Green
Off
Functional Meaning
Power supply failure.
Power supply is operational.
DC output power is present.
DC output power is OK.
AC power is OK.
No power. Output is disabled, or input
power is outside operating range.
"System Status
Chapter 2: Switch Components
31