Adjusting The Brightness; Selecting The Illumination Color; Adjusting The Illumination Color; Setting The Illumination Interlock - Pioneer dex-p99rs Operation Manual

Initial Settings
2 Press MULTI-CONTROL to turn dimmer
on.
# To turn dimmer off, press MULTI-CONTROL
again.

Adjusting the brightness

You can adjust the display brightness.
1 Use MULTI-CONTROL to select
Brightness in the initial setting menu.
Refer to Adjusting initial settings on page 35.
2 Push MULTI-CONTROL left or right to
adjust the brightness level.
0 to 15 is displayed as the level is increased or
decreased.
# When dimmer is functioning, the brightness
level can be adjusted 0 to 10.
Selecting the illumination
color
You can select the illumination color from
among White, Red, Amber, Green and Blue.
Also, you can adjust brightness of each color.
1 Use MULTI-CONTROL to select
Illumination 1 in the initial setting menu.
Refer to Adjusting initial settings on page 35.
2 Push MULTI-CONTROL left or right to
select the desired illumination color.
Each time MULTI-CONTROL is pushed left or
right, the illumination color is selected in the
following order:
White (white)—Red (red)—Amber (amber)—
Blue (blue)—Green (green)—Custom (cus-
tom)
# If you select Custom, you can adjust the level
of three primary colors such as red, green and
blue. For details, Adjusting the illumination color
on this page.
3 Push MULTI-CONTROL up or down to
adjust the brightness level.
+1 to –1 is displayed as the level is increased
or decreased.
Adjusting the illumination
color
You can create an illumination color by adjust-
ing the level of the three primary colors, which
are red, green and blue.
! This function can be used only when
Custom is selected in Illumination 1.
1 Use MULTI-CONTROL to select
Illumination 2 in the initial setting menu.
Refer to Adjusting initial settings on page 35.
2 Push MULTI-CONTROL left or right to
select the color to adjust.
R (red)—G (green)—B (blue)
3 Push MULTI-CONTROL up or down to
adjust the level of color.
4 to 0 is displayed as the level is increased or
decreased.
Setting the illumination
interlock
This unit's button illumination can be inter-
locked with either the ignition key or the vehi-
cle light switch. In this setting, you can select
the appropriate option.
1 Use MULTI-CONTROL to select ILL line
in the initial setting menu.
Refer to Adjusting initial settings on page 35.
2 Press MULTI-CONTROL to turn this func-
tion on.
When this function is on, the button illumina-
tion is interlocked with the vehicle light
switch.
When this function is off, the button illumina-
tion is interlocked with the ignition switch.
# To turn off, press MULTI-CONTROL again.
Section
04
37
En