About Trunked Zones And Workgroups - Tait TM9300 User Manual

If your preset call number is the same as a call to
another radio, then you need to dial a leading 0.
For example, dial 23# to call radio 23 and dial 023#
for preset call number 23.
Clear
2 Press Send or the # or PTT key.
While the call is being setup, you can cancel the
call by pressing Cancel.
About trunked zones and
workgroups
Trunked zones and workgroups are used to manage
the calls on the trunked system. Zones, if used,
typically define geographic areas (towns, suburbs or
counties), or branches of an organization.
Workgroups span multiple zones, and typically define
functions, work areas or job roles.
When your radio belongs to a workgroup, it is said to
be 'subscribed', and you receive all calls directed to
that group of users. A group's members are dynamic,
in that a group only contains radios that are currently
registered on the system and subscribed to the
same group.
23
Send
Your radio may be programmed to use different
names for a 'zone' and 'workgroup'.
For example, 'district' or 'area' may be used in
place of zone, and 'role' or 'group' may be used
in place of workgroup.
Operating in trunked mode 93