Battery Installation; Battery Charge - Panasonic KX-TG2431 Operating Instructions Manual

TG2431.book Page 6 Wednesday, September 22, 2004 1:17 PM

Battery installation

1
Insert the battery (1), and press it
down until it snaps into the
compartment (2).
2
Close the handset cover.

Battery charge

Place the handset on the base unit for 6
hours before initial use.
L The unit beeps once, the CHARGE
indicator will light, and "Charging" will
be displayed.
L "Charge completed" is displayed
when the battery has been fully charged.
The CHARGE indicator will remain lit.
Note:
L To ensure the battery charges properly,
clean the charge contacts of the handset
and base unit with a soft, dry cloth once
a month. Clean more often if the unit is
subject to grease, dust or high humidity.
6
Recharging the battery
Recharge the battery when:
– "Recharge battery" is displayed or
7 flashes on the handset display.
– the handset beeps intermittently while it
is in use.
Note:
2 L Recharge the handset battery for more
than 15 minutes, or the display will
1
continue showing the indication.
L If the battery has been discharged, the
handset will display "Charge for 6h"
and 8 when you place the handset
on the base unit.
L Battery power is consumed whenever
the handset is off the base unit, even
when the handset is not in use. The
longer you leave the handset off the
base unit, the shorter you can actually
talk on the handset. Actual battery
performance depends on a combination
of how often the handset is in use and
how often it is not in use.
L Once the battery is fully charged, you do
not have to charge it again until
"Recharge battery" is displayed or
7 flashes. This will maximize the
battery life.
Attention:
A nickel metal hydride battery that is
recyclable powers the product you have
purchased.
Please call 1-800-8-BATTERY for
information on how to recycle this battery.