Pacific PWD 600 Operating & Maintenance Instructions page 10

18
7
8
9
10
11
12
ITEM PART NO. DESCRIPTION
1 604110 Hose Asm, w/Adapters
2 600206 Adapter, 1-1/2 Hose, Vac End
3 600205 Adaptor, 1-1/2 Hose, Wand End
4 609810 Wand Asm., with Adapter & Pin
609813 Wand Half w/out Adapter (top half)
609809 Wand Half w/Adapter&Pin (bottom half)
5 606710 Disconnect Pin Assembly
6 600204 Adapter, Wand
7 608810 16" Bristle Floor Tool Asm.
8 601803 Top Casting with Adapter
9 601804 Base Casting, Bristle Tool
10 600901 Brush, Bristle Tool
11 602011 Clamp, Brush
12 964022 Screw
13 608812 16" Squeegee Floor Tool Asm.
14 601802 Base Casting-Squeegee Tool
15 600701 Blade, Squeegee Pickup
16 607212 Retainer
17 962115 10-24x3/8 Self-Tapping Screw
18 600210 Tool Adapter, 1-1/4 to 1-1/2
19 608816 1-1/2" Crevice Tool
20 608820 3" Round Dusting Tool
OPTIONAL:
21 608811 16" Carpet Tool Asm.
22 600902 Brush Strip
23 607901 Carpet Shoe
DELUXE TOOL KIT
PART #608510
19
4
20
6
5
8
17
12
QTY.
3
13
14
15
16
TOOL KIT ASSEMBLY:
1. Connect the hose to the collector tank by inserting the
1
large, grooved hose adapter end into the tank adapter.
1
Pull the locking pin up to allow the hose adapter to slide
1
further in. Release the locking pin to engage the large
1
groove.
2. Insert the upper wand half firmly into the lower wand
1
assembly. The dimple on the lower wand aligns with the
1
groove of the upper half to assure a rigid fit.
1
1
3. Insert the wand end into the free end of the vacuum hose.
1
Then fasten the proper floor tool to the to the wand by
1
inserting the mating end of the floor tool into the adapter
2
collar of the wand assembly. Pull the tool locking pin to
2
allow total engagement of the adapter and tool. Release
1
the pin to lock the tool to the wand.
1
2
4. The hand tools may also be used by inserting their adapter
2
directly into the free end of the vacuum hose.
5
1
5. Tool Selection: Choosing the proper tool will give the
1
best results. To vacuum dust and debris from floors or
1
walls-select the bristle floor tool. To remove water, liquid
waste, strip solution, etc. from hard surfaced floors-use
1
the squeegee floor tool. When vacuuming carpets or
1
rugs-choose the carpet tool.
1
10
1
2
OPTIONAL ACCESSORY
CARPET TOOL- ITEM 21
8
9
12
22
23