Page 1
The contents of this manual are based on the latest product and safe operation of this machine. Read this book care- information available at the time of publication. Pacific fully before starting the machine. Keep this book and tell reserves the right to make changes or improvements to its all operators to read the book.
Page 2
IMPORTANT SAFETY INSTRUCTIONS To assure the safe operation of this machine, you must read and understand all warnings and instructions in this book. If you do not understand, ask your supervisor. READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE WARNING : To reduce the risk of fire, electric shock, or injury: 1.
Page 3
OPERATING & MAINTENANCE PROCEDURES WARNING! For the safe operation of this machine OPERATION follow the instructions given in this booklet and the Set the machine upright onto the pad. Plug the machine’s training given by your supervisor. Failure to do so can power cable into a properly grounded outlet (see Safety result in personal injury and/or damage to machine and Instructions).
Page 7
1500 DCP & 2000 DCP MOTOR PARTS LIST & WIRING DIAGRAM ITEM PART NO. DESCRIPTION QTY. 505286 Motor 115V, 1.5HP 502919 End Bell - Motor LOWER 500417 Armature Asm.w/Bearings,115V 902012 Bearing, Motor Lower 503117 Field & Shell Assembly 902003 Bearing, Motor Top 500903 Carbon Brush, Motor 115V 507322...
Page 8
The inoperative machine or warranted parts must be delivered to the authorized dealer with shipping and delivery charges prepaid. If unable to locate the Dealer, you may contact Pacific at the address listed herein for the location of the nearest Pacific repair center or agent or for other instructions pertaining to your warranty difficulty.
Need help?
Do you have a question about the FURY 2000 DCP and is the answer not in the manual?
Questions and answers