Charging Battery - SoftBank 921SH User Manual

Charging Battery

Charging Battery

1
Follow these steps to charge battery
using supplied Desktop Holder. (Battery
must be inserted in handset to charge it.)
. Together with Desktop Holder, use
specified AC Charger ZTDAA1 (sold
separately) only. In this guide, ZTDAA1 is
referred to as "AC Charger."
. See the Desktop Holder guide for more
information.
AC 100V Outlet
Blades
Release
Tabs
Charger
Connector
AC Charger
Connection Port
Advanced
1
(Disabling USB Charge (P.13-18)
10
1-
Important AC Charger Usage Note
. Fold back blades after charging. Do not
pull, bend or twist the cord.
1
1
2
2
Small Light
3
Arrows
Insert AC Charger
connector into Desktop
Holder
. Connection Port is on the back of
Desktop Holder.
. With arrows up, insert connector until
it clicks.
Extend blades and plug AC
Charger into AC outlet
Place handset onto Desktop
Holder
. Push down until 921SH clicks into
place.
. Small Light illuminates red while
charging.
. When charging completes Small
Light goes out.
4
Unplug AC Charger
. Pull AC Charger straight out.
5
Disconnect 921SH from
Desktop Holder
6
Fold back blades and
replace Port Cover
. Squeeze release tabs when
removing AC Charger connector.
When Small Light Flashes
. Battery is unchargeable; may be defective
or simply at the end of its life; replace it.
USB Charge
. Connect handset (with power on) to PC
via USB Cable to charge battery.