2 Unit Operation
2.1 Unit Login
After the system boots up, the EZ Setup wizard is displayed. See Figure 3-1.
Tips
Check the box to display the EZ Setup wizard window when the system is rebooted.
Click Cancel or Next to display the login interface. See Figure 3-2 for the login interface.
Listed below is the default login ID:
Username: admin (administrator, local and remote)
Note:
For security purposes, it is required to create the administrator password on the initial login.
5 incorrect login attempts within 30 minutes will result in a lock on the account. Once the unit is locked, please
wait for 30 minutes before attempting to log in again.
To reset the password, please contact Speco Technologies Technical Support.
Figure 3-1
Figure 3-2
6