Connect To The Wireless Web - Anker Compact Wi-Fi Repeater Instruction Manual

setting is Anker-Repeater.
Set Security Options and PassPhrase.
Note: For your PassPhrase, i.e. the password to logon to your new wireless
network, this password must contain at least 8 characters and may include
case-sensitive letters and numbers. This password is not necessarily same as the
one of original router's network. Save your password in a safe place as a backup.
f. Click Finish to apply the settings. Wait 2 minutes to allow a full restart.
Step 5. Connect to the Wireless Web
After the device fully restarts, connect to the wireless web via it.
On your computer, view the list of available wireless networks (typically
5.1
accessible via a Wi-Fi icon located at the corner of your computer's desktop).
Select the newly named network. If the desired network does not appear, please
5.2
wait and refresh until the network becomes available.
Connect to your desired network, and input your password when prompted.
Congratulations! You should now be able to surf the Internet with a strong Wi-Fi
signal from your newly configured 4-in-1 Anker Compact Wi-Fi Repeater.
Note: You may move your Anker device to different locations as your needs demand.
Your settings will be saved. For optimal performance, always ensure that the wireless
router signal that the device receives is strong (ideally 80%).
5