Table of Contents
Advertisement
The wireless LAN and file sharing functions are available in WiFi sharing mode while supplying power to
another device.
Setup with Web Browser
QGenie also provides Web interface for users to setup basic functions. So you can use Web Browser from
your PC or other devices to change its configuration.
Login into Web Interface
1.
Turn on QGenie, and use PC to connect to its Wireless network. By default, the name of QGenie is [QG-
XXXXXX] , you can find the proper name from the sticker located on the back side of QGenie.
2.
After Wireless LAN is connected, open your browser and type
welcome screen.
3.
If you login with Guest, you don't need password, but you can only view current status of QGenie.
Include remaining power, storage space, and internet connection status. And you can access to the data
in attached SD card and USB storage device from your browser.
4.
IF you want to change the settings of QGenie, you must login with Admin.
The default password is "admin", but you can change it later.
Setup Device ID with Web Interface
1.
Login into Web Interface with Admin permission.
http://192.168.60.1/
7
and you will see
Advertisement
Table of Contents
