Table of Contents
Advertisement
This unit does not supply power to other devices.
Make sure that the USB cable is connected correctly.
The remaining battery charge of this unit may be low. Please charge this unit.
The device to be supplied power is not ready for charging. For details on how to charge other devices, please
refer to its instruction manual.
The maximum output current of the USB port of this unit is 1500 mA. If the supply output current exceeds
1500 mA, the power limited for safety.
Before supplying power to another device, be sure to check the voltage and current ratings of the device.
Correct operation is not assured if a USB hub or USB extension cable is used.
Wireless LAN connection
Wireless LAN connection to a smartphone, tablet or computer
cannot be established.
Make sure that this unit and your device are turned on and the wireless LAN function of your device is
enabled.
Ambient conditions (obstacles between this unit and your device, electromagnetic interference, wall
materials, etc.) may adversely affect the wireless communication range. Change the location of this unit, or
move your device and this unit closer together. If the problem is not resolved, press the RESET switch to
restart the unit or set the unit to the factory defaults (*).
This unit and your device may be too far away from each other. Move them closer together.
The number of users connected to this unit may have reached the maximum limit.
Equipment that uses the 2.4 GHz frequency band, such as a microwave oven or Bluetooth device, may be in
use near this unit and result interference. Move such equipment away from this unit, or turn the equipment
off.
When you are using a password to secure connection between this unit and your device, make sure that you
are entering the correct password. If you have forgotten the password, restore the factory default settings by
pressing RESET button for more than 3 seconds and release (*).
*Since all settings on this unit will be initialized, it is recommended that you take notes of settings before restoring the
factory defaults.
Internet connection cannot be established
Make sure that your network equipment (wireless router, etc.) is turned on. Make sure that the wireless LAN
function of your device is enabled.
18
Advertisement
Table of Contents
