Table of Contents
Advertisement
The maximum output current of the USB port of this unit is 1500mA. If the supply output current
exceeds 1500mA, the output power is limited for safety. Before supplying power to another device, be
sure to check the voltage and current ratings of the device.
When powering a device from this product, the charging time differs depending on the remaining
battery charge.
Correct operation is not assured if a USB hub or USB extension cable is used.
Maintenance
When dirt attach on "QGenie," wipe it with a soft cloth (a cloth designed for wiping reading glasses, etc).
When it is very dirty, wipe it with a cloth sprinkled with diluted neutral cleaning liquid. Do not use paint
thinner, gasoline, alcohol, etc. These can damage the finish of its surface. Take care if using water to clean its
appearance.
Notes on memory card
Do not remove the memory card and other storage devices while read/write data.
Data can be destroyed in the following situations.
1.
While reading writing data and the memory card is removed, or if QGenie's power is turned off.
2.
When used in a place affected by static electricity or electrical noise.
Do not touch terminal with your hand or any metal object.
When inserting the memory card to QGenie, if you use too much force, you can damage the memory
card or this device.
You cannot read or record data that requires copyright protection technology.
The file system's design limits the file size which can be saved to or played from an SD memory card and
SDHC memory card. Each file must be less than 4 GB on FAT file system. Please use other disk format
such as exFAT, or NTFS instead if you need to store files in big size.
Troubleshooting
Main unit
The power does not turn on.
The battery pack of this unit may be running out. Please charge it following instructions.
16
Advertisement
Table of Contents
