Table of Contents
Advertisement
3.
Select proper type of your wired connection from [Wired Internet].
DHCP: The most common method, choose this if you connect the cable to home router.
Static IP: Similar with DHCP, but it is required to input proper settings manually.
PPPoE: If you plug QGenie directly to ADSL/VDSL modem, you have to input username and
password to gain access to the Internet.
If you can't determine what kind of Internet you are using, please contact the administrator of
your internet service provider for further information.
4.
Press "Connect" to apply settings.
By default, QGenie is set to Wired Connection – DHCP.
Setup Wireless Internet
1.
Login into Web Interface with admin permission.
2.
Select [Internet] from the navigation panel
3.
Press "Search" next to Wireless connection
4.
Press connect next to the Wireless network you want to link with, if target network is password
protected, QGenie will indicate you to input proper password of that wireless network. Settings will
apply to QGenie after enter passwords.
After settings are applied, QGenie will restart. Please reconnect to QGenie manually.
Note:
QGenie will remember last 6 successful Wireless Internet Connection. In this case you will not require to type
password again, and QGenie will try to connect with them if you boot QGenie with Wireless Internet setting.
10
Advertisement
Table of Contents
