Getting Started; Charge The Unit; Charging From Computer; Charging With A Usb Ac Adaptor - QGenie QG-103N Manual

Turn on QGenie into WiFi Storage mode:
Move power switch to top, the OLED screen will display "QGenie" and begin booting. App and PC can access
to QGenie when booting finish.
Turn on QGenie into Power Bank Mode:
Move power switch to middle, the OLED screen will show "Power Bank."
Turn off QGenie:
Move power switch to bottom, the OLED screen will turn off.

Getting started

Charge the Unit

Charging from computer

1. Turn on the computer. QGenie can't be charged when PC is turned off or in sleep mode.
2. Connect this unit to the computer with the USB cable. The OLED battery indicator display battery
charge icon and charge will begin. When this unit is fully charged, the OLED battery indicator show
100%.
3. When charging is complete, disconnect the USB cable from the unit and the computer.
Approximate charging time: 4 hours (estimation is under AXIM's test condition).
Note:

QGenie will be recognized as card reader when being connected with PC.

Be sure to insert the connector from correct direction. Pushing the connector forcibly into the port may
damage the port and result malfunction.

Charge the battery in an ambient temperature of 0 °C - 45 °C (32 °F - 113 °F). For optimum performance
of the rechargeable lithium-ion battery, it is recommended to charge between 10 °C – 35 °C (50 °F - 95
°F).

If an abnormality (e.g. increased unit temperature, insufficient power supply) occurs while charging, the
OLED screen may show error message, and charging may stop.

Charging with a USB AC adaptor

1. Connect the USB AC adaptor to the USB micro port located on the right side of this unit.
5