Table of Contents
Advertisement
3.
Select Security Type in Wireless Security. QGenie supports WEP, WPA, and WPA2 standard to protect
your Wireless LAN from being accessed with unauthorized unit. And it is recommended to use WPA2
for best security.
4.
After input passwords, press "Save" to apply new security settings.
Note:
After press save, the Wireless LAN connection between PC and QGenie will be disrupted because the
security setting of Wireless LAN has been changed. Please reconnect with new password manually.
For WPA/WPA2, the valid password length is 8 ~ 63 characters. WEP can only accept password which is
5 or 13 characters.
Setup QGenie's Internet connection by Web Interface
By default, when connect to QGenie, the Internet connection will be disrupted because QGenie does not
connect itself to Internet yet. QGenie supports 3 methods to connect to Internet:
1.
Wired Internet
You can plug Ethernet cable to QGenie, and use its network.
2.
Wireless Internet
You can use QGenie to connect to existing wireless internet; QGenie can act like a repeater.
3.
USB Internet
You can plug iPhone, Android phone which supports tethering, or use 3G/4G USB dongle to the
USB port on QGenie, and access the Internet from above devices.
Setup Wired Internet
1.
Login into Web Interface with admin permission.
2.
Select [Internet] from the navigation panel
9
Advertisement
Table of Contents
