3Com III ISA User Manual page 63

Follow these steps to change the configuration settings:
1 Run the installation program described in
NIC" earlier in this chapter.
2 From the main menu (see
and Diagnostic Program.
3 If multiple NICs are installed in the PC, use the arrow keys to
select the NIC you want to configure. Press Tab to move to
the Select button and press Enter.
4 Press Tab to display the dialog box, and then select the
option that you want to change. Press Enter.
5 Use the arrow keys to scroll through the list of settings for
that option. Select a setting and press Enter.
6 Continue this procedure for other options. For more
information on a specific option, select the option and
press F1.
7 To save the new settings, select OK and press Enter.
Changing Configuration Settings
Figure 4-1), select Configuration
4-9
"Configuring the