Sony HT-RD150 Operating Instructions Manual page 12

Setting for when using a Sony DVD recorder/player or "Play Station 2'
When connecting a Sony DVD recorder/player or "Play Station 2" as shown on the previous page,
perform the following settings on each component to fully enjoy the surround sound of the system. Other
settings may be necessary for other manufacture's DVD recorder/player. For details, refer to the operating
instructions supplied with each component.
DVD recorder/player
1
Select "AUDIO SETUP" in the setup display.
2
Set "AUDIO DRC" to "WIDE RANGE."
3
Set "DIGITAL OUT" to "ON."
4
Set "DOLBY DIGITAL" to "DOLBY
DIGITAL."
5
Set "DTS' to "ON."
6
Set "Fs" to "48 kHz."
"Play Station 2" is a trademark of Sony Computer Entertainment.
12
"Play Station 2"
1
Select "AUDIO SETTING" in the setup
display.
2
Select "AUDIO DIGITAL OUTPUT."
3
Set "OPTICAL DIGITAL OUTPUT" to
"ON."
4
Set "DOLBY DIGITAL" to "ON."
5
Set "DTS' to "ON."