Table of Contents
Advertisement
[ECONOMY (AC)]
When connected to AC adaptor about 15 minutes have passed without any operation, this unit automatically turns off.
≥ (In case of Playback Mode)
Start up the unit in SDI Mode, and press the MODE button to switch to Playback Mode.
[ON]/[OFF]
≥ [ECONOMY (AC)] operates only during SDI Mode. This will not operate during CAM Mode.
≥ This unit will not automatically turn off even if the [ECONOMY (AC)] is set to [ON] in following cases:
j During pause of playback
j PRE-REC is used
j The unit and a PC are connected with a USB 2.0 cable
[SYSTEM FREQ]
Set the system frequency of this unit.
[TOUCH SCREEN]
Enables/disables the touch operation of the LCD monitor.
[ENABLE]/[DISABLE]
[CLIP NUMBER RESET]
Sets the file number of the next MP4 clip or still picture to be recorded to 0001.
≥ Folder number is updated and file number will start from 0001.
≥ To reset the folder number, format the SD card, and then perform [CLIP NUMBER RESET].
[DISPLAY MENU]
Either the normal menu or the Camera Text Menu to be displayed when the operation to open menu on the remote
camera controller is performed via network when the camera head is connected can be selected.
[TOUCH]:
[TEXT]:
≥ It is not possible to display/output the normal menu and the Camera Text Menu at the same time.
≥ To display the menu on the HDMI/SDI output destination, set [CHAR OUTPUT] to [ON].
(l
70, 214)
(l
40)
Displays normal menu to the LCD monitor of this unit and the output destination of the
HDMI OUT/SDI OUT terminal.
The menu is not displayed on the IP image.
Displays the Camera Text Menu on the IP image as superimposed text.
The menu is not displayed on the LCD monitor of this unit and the output destination of the
HDMI OUT/SDI OUT terminal.
(l
106)
(l
107)
- 227 -
(l
219)
Advertisement
Table of Contents
