Table of Contents
Advertisement
[INITIAL SET]
The menu settings or [SELECT SCENE] are reset to the default.
[ALL]:
[SCENE]:
[USER]
[NETWORK]:
*1
Settings for [CLOCK SET], [TIME ZONE], [SYSTEM FREQ] and [LANGUAGE] will not be changed.
*2
Not displayed during SDI Mode.
≥ Returning all settings to the default is not possible during Freeze Frame.
≥ If you select [ALL] or [NETWORK] in CAM Mode, the settings of [CAMERA LAN SETUP] will be initialized, while if
you select it in SDI Mode, the settings of [RECORDER LAN SETUP] will be initialized.
[LANGUAGE]
You can select the language on the screen display and the menu screen.
[ 日本語 ][English]/[ 中文 ]
[NETWORK SETUP]
: [NETWORK SETUP] # desired setting
[RECORDER LAN SETUP]
The network setup of this unit, such as IP address, subnet mask, and MAC address, can be changed or confirmed.
(l
128)
[DHCP]/[IP Address]/[Subnet Mask]/[Gateway]/[DNS]/[Primary DNS]/[Secondary DNS]/[MAC Address]
[CAMERA LAN SETUP]
The network setup of the camera head, such as IP address, subnet mask, and MAC address, can be changed or
confirmed.
(l
128)
[DHCP]/[IP Address]/[Subnet Mask]/[Gateway]/[DNS]/[Primary DNS]/[Secondary DNS]/[MAC Address]
This is for initializing all menus.
This is for initializing the setting of each scene number of [SELECT SCENE].
Initializes the setup other than [SELECT SCENE] and [NETWORK SETUP].
This is for initializing the [NETWORK SETUP] menu settings.
(l
200)
*1
(l
- 228 -
*1
69)
*2
Advertisement
Table of Contents
