Table of Contents
Advertisement
Connecting to a PC
A USB 2.0 Cable (A-miniB type) (commercially-available)
≥ Insert the plugs as far as they will go.
1
Connect this unit to the AC adaptor.
≥ Use the AC adaptor to free you from worrying about the battery running down.
2
Turn on the unit.
3
Set [PRIORITY MODE] to [REC/PB] or [REC/PB(4K)].
: [RECORD SETUP] # [PRIORITY MODE] # [REC/PB] or [REC/PB(4K)]
4
Press the MODE button to switch to the Playback Mode.
5
Connect this unit to a PC.
≥ The USB function selection screen will appear.
6
Touch [PC] on the screen of this unit.
≥ This unit is automatically recognized as an external drive of the PC.
≥ When you select an option other than [PC], reconnect the USB Cable.
≥ When using the battery, the LCD monitor turns off after about 5 seconds. Touch the screen to turn the LCD monitor
on.
≥ This connection cannot be used in the Recording Mode.
≥ A USB 2.0 cable is not supplied with this unit.
Please use a commercially available cable compatible with the USB 2.0 standard. Connect the miniB connector to
this unit.
≥ When performing reading/writing between a PC and an SD card, be aware that some SD card slots built into PCs
and some SD card readers/writers are not compatible with the SDHC Memory Card or SDXC Memory Card.
∫ To disconnect USB Cable safely
(For Windows)
Select the
icon in task tray displayed on the PC, and then select the model number of this unit to
disconnect the USB cable.
≥ Depending on your PC's settings, this icon may not be displayed.
(For Mac)
Drag [CAM_SD] disk icon to the [Trash], and then disconnect the USB Cable.
About the screen indication of the unit
≥ Do not disconnect the USB Cable, battery, or AC adaptor while the access lamp is on or card access icon (
appears on the unit screen.
≥ If the screen does not change when the unit is operated while connected to a PC, disconnect the battery and/or
AC adaptor, wait approximately 1 minute, reconnect the battery and/or AC adaptor, wait approximately 1 minute
again, and then turn the unit back on. (Data may be destroyed when above operation is performed while
accessing the SD card.)
(l
- 106 -
miniB
107)
)
Advertisement
Table of Contents
