Table of Contents
Advertisement
Item
Install the driver as instructed in
Thunderbolt software to your computer, and this can be accessed by clicking or double-clicking
the icon
Thunderbolt support can be enabled (default) or disabled in the BIOS
(R)Thunderbolt Support (Advanced Menu > Intel(R) Thunderbolt)" on page 5 -
also set the level of security for the Thunderbolt port in the BIOS. You can also set the security
level of the port in the BIOS (see
on page 5 -
1.
Plug a Thunderbolt
2.
Some Thunderbolt devices will require their own driver installation at this point.
3.
Access the Thunderbolt software to view information on device chains.
The display configuration for the Thunderbolt port can be set up in the BIOS (see
Control (Advanced Menu > Advanced Chipset Control)" on page 5 -
In order to prevent system problems make sure you do not simply pull the cable out from
the Thunderbolt port. The hardware must be ejected safely:
1.
Go to the notification area of the taskbar in the Desktop App and click on the Safely
Remove Hardware and Eject Media icon.
2.
Click on Eject "Thunderbolt Device Name".
3.
When yo u see the "Safe to Remove Hardware" message you can remove the cable.
"Thunderbolt Port Driver" on page 6 -
in the Start screen, Desktop app or notification area of the taskbar.
"Security Level (Advanced Menu > Intel(R) Thunderbolt)"
10).
device into the Thunderbolt
™
Ejecting Thunderbolt Devices
Interface (Ports & Jacks)
Description
port.
™
Interface (Ports & Jacks) A - 5
13. This will install the
"Intel
10. You can
"DDI
9).
A
Advertisement
Table of Contents
